Trärummet: Skillnad mellan sidversioner
Cloraux (diskussion | bidrag) Ingen redigeringssammanfattning |
Cloraux (diskussion | bidrag) Ingen redigeringssammanfattning |
||
| Rad 2: | Rad 2: | ||
*Table saw | *Table saw | ||
**Blade height adjustment not working. Screw and gear are worn out. | **<s>Blade height adjustment not working. Screw and gear are worn out.</s> | ||
***<s>Order D-71 wormwheel D-56 height adjustment rod</s> | ***<s>Order D-71 wormwheel D-56 height adjustment rod</s> | ||
***Install new parts, check for loose screws and friction in the machanism | ***<s>Install new parts, check for loose screws and friction in the machanism</s> | ||
***follow this forum for more info <nowiki>https://www.woodworkforums.com/f153/bought-mj2325b-2nd-hand-help-76708/2</nowiki> | ***<s>follow this forum for more info <nowiki>https://www.woodworkforums.com/f153/bought-mj2325b-2nd-hand-help-76708/2</nowiki></s> | ||
**Make zero-clearance inserts (create .dxf for the lasercutter) | **Make zero-clearance inserts (create .dxf for the lasercutter) | ||
**Adjust the table top (currently not perfectly flat) | **<s>Adjust the table top (currently not perfectly flat)</s> | ||
**tighten the screws of the fence, check for squareness and adjust the distance mark | **<s>tighten the screws of the fence, check for squareness and adjust the distance mark</s> | ||
**General cleaning | **<s>General cleaning</s> | ||
<br /> | <br /> | ||
Versionen från 8 januari 2020 kl. 09.03
2020 to-do list for maintenance and upgrades
- Table saw
Blade height adjustment not working. Screw and gear are worn out.Order D-71 wormwheel D-56 height adjustment rodInstall new parts, check for loose screws and friction in the machanismfollow this forum for more info https://www.woodworkforums.com/f153/bought-mj2325b-2nd-hand-help-76708/2
- Make zero-clearance inserts (create .dxf for the lasercutter)
Adjust the table top (currently not perfectly flat)tighten the screws of the fence, check for squareness and adjust the distance markGeneral cleaning
- Table router
- Cut and install new top board made of phenolic coated plywood
- Add height adjustment screws to the router board
- Finish the router fence
- Fix the spindle locking pin
- Check the height adjustment mechanism. Bits move down slightly when used.
- Band saw
- Order and install new tires on the wheels
- Install brushes to clean the wheels
- Balancing of the wheels to reduce vibrations
- Replace the small dust collector hole for a large one to connect to the HF vacuum.
- Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)
- Drill press
- Fix it with a chain to the ceiling/bold it to the ground
- Add a bolt to the top gear cover
- 3D print dust collection segmented hose (see https://www.thingiverse.com/thing:3283800)
- Lathe
- order/get the new retaining bolt for the chuck
- make supports for the new tools on the french cleats
- connect the lights/ or replace it with some LED strips on the dust collection
- Planer/jointer
Replace andadjust the blades + fix the broken bolt- Build a side fence
- Build/buy a dust collector
- built a platform above the planer storage corner to protect it from tools, etc.
- Miter saw station + storage
- Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage
- Dust collection system
- Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit
- 1m flexible hose to connect to the miter dust collection box
- Flexible hose to connect to band saw or lathe (1.5-2m)
- Dust collection pipe behind the drill press with double door for drill press and belt sander
- Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit
