Trärummet: Skillnad mellan sidversioner

VisuellWikitext

Versionen från 25 februari 2020 kl. 21.35

2020 to-do list for maintenance and upgrades

Table saw
- ~~Blade height adjustment not working. Screw and gear are worn out.~~
  - ~~Order D-71 wormwheel D-56 height adjustment rod~~
  - ~~Install new parts, check for loose screws and friction in the machanism~~
  - ~~follow this forum for more info https://www.woodworkforums.com/f153/bought-mj2325b-2nd-hand-help-76708/2~~
- Make zero-clearance inserts (create .dxf for the lasercutter)
- ~~Adjust the table top (currently not perfectly flat)~~
- ~~tighten the screws of the fence, check for squareness and adjust the distance mark~~
- ~~General cleaning~~

Table router
- Cut and install new top board made of phenolic coated plywood
- Add height adjustment screws to the router board
- ~~Finish the router fence~~
- Fix the spindle locking pin
- ~~Check the height adjustment mechanism. Bits move down slightly when used.~~

Band saw
- Order and install new tires on the wheels - on their way
- Install brushes to clean the wheels
- Balancing of the wheels to reduce vibrations
- ~~Replace the small dust collector hole for a large one to connect to the HF vacuum.~~
- Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)

Drill press
- Fix it with a chain to the ceiling/bold it to the ground
- Add a bolt to the top gear cover
- 3D print dust collection segmented hose (see https://www.thingiverse.com/thing:3283800) (or by one in bauhaus)

Lathe
- Clean and grease the speed vario - 6260 bearings on their way for reassembly
- order/get the new retaining bolt for the chuck (M12 - 320-330 mm)
- make supports for the new tools on the french cleats
- connect the lights/ or replace it with some LED strips on the dust collection

Planer/jointer
- ~~Replace and~~ ~~adjust the blades~~ + fix the broken bolt (we have new bolts, to be replace next time we change the blades)
- Build a side fence
- ~~Build/buy a dust collector~~
- built a platform above the planer storage corner to protect it from tools, etc.

Miter saw station + storage
- ~~Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage~~

Dust collection system
- ~~Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit~~
  - ~~1m flexible hose to connect to the miter dust collection box~~
- Flexible hose to connect to band saw or lathe (1.5-2m)
- Dust collection pipe behind the drill press with double door for drill press and belt sander

@@ Rad 9: / Rad 9: @@
 **<s>Adjust the table top (currently not perfectly flat)</s>
 **<s>tighten the screws of the fence, check for squareness and adjust the distance mark</s>
-**<s>General cleaning</s>
+**<s>General cleaning</s><br />
-<br />
 *Table router
 **Cut and install new top board made of phenolic coated plywood
 **Add height adjustment screws to the router board
-**Finish the router fence
+**<s>Finish the router fence</s>
 **Fix the spindle locking pin
-**Check the height adjustment mechanism. Bits move down slightly when used.
+**<s>Check the height adjustment mechanism. Bits move down slightly when used.</s><br />
-<br />
 *Band saw
-**Order and install new tires on the wheels
+**Order and install new tires on the wheels - on their way
 **Install brushes to clean the wheels
 **Balancing of the wheels to reduce vibrations
-**Replace the small dust collector hole for a large one to connect to the HF vacuum.
+**<s>Replace the small dust collector hole for a large one to connect to the HF vacuum.</s>
-**Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)
+**Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)<br />
-<br />
 *Drill press
 **Fix it with a chain to the ceiling/bold it to the ground
 **Add a bolt to the top gear cover
-**3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>)
+**3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>) (or by one in bauhaus)<br />
-<br />
 *Lathe
-**order/get the new retaining bolt for the chuck
+**Clean and grease the speed vario - 6260 bearings on their way for reassembly
+**order/get the new retaining bolt for the chuck (M12 - 320-330 mm)
 **make supports for the new tools on the french cleats
-**connect the lights/ or replace it with some LED strips on the dust collection
+**connect the lights/ or replace it with some LED strips on the dust collection<br />
-<br />
 *Planer/jointer
-**<s>Replace and</s> adjust the blades + fix the broken bolt
+**<s>Replace and</s> <s>adjust the blades</s> + fix the broken bolt (we have new bolts, to be replace next time we change the blades)
 **Build a side fence
-**Build/buy a dust collector
+**<s>Build/buy a dust collector</s>
 **built a platform above the planer storage corner to protect it from tools, etc.
@@ Rad 54: / Rad 45: @@
 *Miter saw station + storage
-**Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage
+**<s>Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage</s>
 <br />
 *Dust collection system
-**Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit
+**<s>Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit</s>
-***1m flexible hose to connect to the miter dust collection box
+***<s>1m flexible hose to connect to the miter dust collection box</s>
 **Flexible hose to connect to band saw or lathe (1.5-2m)
-**Dust collection pipe behind the drill press with double door for drill press and belt sander
+**Dust collection pipe behind the drill press with double door for drill press and belt sander <br />
-**[[Fil:Plans miter storage.jpg|miniatyr]]<br />