Trärummet

Trärummet rules and recommendations

Rules

• It is forbidden to work with pressure treated wood in the room for health reasons
• You are only allowed to work with woods and some plastics in Trärummet. Metal, stone, bricks and anything else is forbidden to work with in the room.
• Always use some form of dust collection when working with the machines (not necessary for the drill press and not available for the lathe).
• Always clean up as soon as you are done and before you leave. This is a general rule for the makerspace, not just this room.

Recommendations

• Attend a wood workshop intro before using machines that you are unfamiliar with.

• Use eye protection and where applicable ear muffs when using machines.
• Keep long hair, loose clothing and any kind of straps, cords, jewelry etc. tucked away when using machines. If the catch in a spinning machine it can end really badly.
• Do not use gloves with the machines, if they get caught it will end badly before you can react.

2020 to-do list for maintenance and upgrades

• Table saw
  • Make zero-clearance inserts (create .dxf for the lasercutter)

• Band saw
  • Balancing of the wheels to reduce vibrations
  • Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)
    

• Drill press
  • Fix it with a chain to the ceiling/bold it to the ground
  • Add a bolt to the top gear cover
  • 3D print dust collection segmented hose (or buy one in bauhaus)
    

• Lathe
  • make supports for the new tools on the french cleats
  • Install some more lights?
    

• Planer/jointer
  • new motor.