Trärummet: Skillnad mellan sidversioner

VisuellWikitext

Versionen från 17 december 2019 kl. 22.48

2020 to-do list for maintenance and upgrades

Table saw
- Blade height adjustment not working. Screw and gear are worn out.
  - D-71 wormwheel D-56 height adjustment rod
- Make zero-clearance inserts (create .dxf for the lasercutter)
- Adjust the table top (currently not perfectly flat)
- tighten the screws of the fence, check for squareness and adjust the distance mark
- General cleaning

Table router
- Cut and install new top board made of phenolic coated plywood
- Add height adjustment screws to the router board
- Finish the router fence

Band saw
- Order and install new tires on the wheels
- Balancing of the wheels to reduce vibrations
- Replace the small dust collector hole for a large one to connect to the HF vacuum.
- Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)

Drill press
- Fix it with a chain to the ceiling/bold it to the ground
- Add a bolt to the top gear cover
- 3D print dust collection segmented hose (see https://www.thingiverse.com/thing:3283800)

Lathe
- order/get the new retaining bolt for the chuck
- make supports for the new tools on the french cleats
- connect the lights/ or replace it with some LED strips on the dust collection

Planer/jointer
- Replace the blades
- Build a side fence
- Build/buy a dust collector

@@ Rad 1: / Rad 1: @@
 to-do list for maintenance and upgrades
-* Table saw
+*Table saw
-** Blade height adjustment not working. Screw and gear are worn out.
+**Blade height adjustment not working. Screw and gear are worn out.
-** Make zero-clearance inserts (create .dxf for the lasercutter)
+***D-71 wormwheel  D-56 height adjustment rod
-** Adjust the table top (currently not perfectly flat)
+**Make zero-clearance inserts (create .dxf for the lasercutter)
-** tighten the screws of the fence, check for squareness and adjust the distance mark
+**Adjust the table top (currently not perfectly flat)
-** General cleaning
+**tighten the screws of the fence, check for squareness and adjust the distance mark
-* Table router
+**General cleaning
-** Cut and install new top board made of phenolic coated plywood
-** Add height adjustment screws to the router board
+<br />
-** Finish the router fence
-* Band saw
+*Table router
-** Order and install new tires on the wheels
+**Cut and install new top board made of phenolic coated plywood
-** Balancing of the wheels to reduce vibrations
+**Add height adjustment screws to the router board
-** Replace the small dust collector hole for a large one to connect to the HF vacuum.
+**Finish the router fence
-** Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)
-* Drill press
+<br />
-** Fix it with a chain to the ceiling/bold it to the ground
-** Add a bolt to the top gear cover
+*Band saw
-** 3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>)
+**Order and install new tires on the wheels
-* Lathe
+**Balancing of the wheels to reduce vibrations
-** order/get the new retaining bolt for the chuck
+**Replace the small dust collector hole for a large one to connect to the HF vacuum.
-** make supports for the new tools on the french cleats
+**Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)
-** connect the lights/ or replace it with some LED strips on the dust collection
+<br />
+*Drill press
+**Fix it with a chain to the ceiling/bold it to the ground
+**Add a bolt to the top gear cover
+**3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>)
+<br />
+*Lathe
+**order/get the new retaining bolt for the chuck
+**make supports for the new tools on the french cleats
+**connect the lights/ or replace it with some LED strips on the dust collection
+<br />
+*Planer/jointer
+**Replace the blades
+**Build a side fence
+**Build/buy a dust collector
 <br />