Trärummet

2020 to-do list for maintenance and upgrades

• Table saw
  • Blade height adjustment not working. Screw and gear are worn out.
    • D-71 wormwheel D-56 height adjustment rod
  • Make zero-clearance inserts (create .dxf for the lasercutter)
  • Adjust the table top (currently not perfectly flat)
  • tighten the screws of the fence, check for squareness and adjust the distance mark
  • General cleaning

• Table router
  • Cut and install new top board made of phenolic coated plywood
  • Add height adjustment screws to the router board
  • Finish the router fence

• Band saw
  • Order and install new tires on the wheels
  • Balancing of the wheels to reduce vibrations
  • Replace the small dust collector hole for a large one to connect to the HF vacuum.
  • Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)

• Drill press
  • Fix it with a chain to the ceiling/bold it to the ground
  • Add a bolt to the top gear cover
  • 3D print dust collection segmented hose (see https://www.thingiverse.com/thing:3283800)

• Lathe
  • order/get the new retaining bolt for the chuck
  • make supports for the new tools on the french cleats
  • connect the lights/ or replace it with some LED strips on the dust collection
    

• Planer/jointer
  • Replace the blades
  • Build a side fence
  • Build/buy a dust collector