Trärummet: Skillnad mellan sidversioner

VisuellWikitext

Versionen från 11 januari 2021 kl. 13.22

2020 to-do list for maintenance and upgrades

Table saw
- Make zero-clearance inserts (create .dxf for the lasercutter)

Band saw
- Balancing of the wheels to reduce vibrations
- Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)

Drill press
- Fix it with a chain to the ceiling/bold it to the ground
- Add a bolt to the top gear cover
- 3D print dust collection segmented hose (or buy one in bauhaus)

Lathe
- make supports for the new tools on the french cleats
- Install some more lights?

Planer/jointer
- new motor.

@@ Rad 2: / Rad 2: @@
 *Table saw
-**<s>Blade height adjustment not working. Screw and gear are worn out.</s>
-***<s>Order D-71 wormwheel  D-56 height adjustment rod</s>
-***<s>Install new parts, check for loose screws and friction in the machanism</s>
-***<s>follow this forum for more info https://www.woodworkforums.com/f153/bought-mj2325b-2nd-hand-help-76708/2</s>
 **Make zero-clearance inserts (create .dxf for the lasercutter)
-**<s>Adjust the table top (currently not perfectly flat)</s>
-**<s>tighten the screws of the fence, check for squareness and adjust the distance mark</s>
-**<s>General cleaning</s><br />
-*Table router
+<br />
-**Cut and install new top board made of phenolic coated plywood
-**Add height adjustment screws to the router board
-**<s>Finish the router fence</s>
-**Fix the spindle locking pin
-**<s>Check the height adjustment mechanism. Bits move down slightly when used.</s><br />
 *Band saw
-**Order and install new tires on the wheels - on their way
-**Install brushes to clean the wheels
 **Balancing of the wheels to reduce vibrations
-**<s>Replace the small dust collector hole for a large one to connect to the HF vacuum.</s>
 **Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)<br />
@@ Rad 31: / Rad 16: @@
 *Lathe
-**Clean and grease the speed vario - 6260 bearings on their way for reassembly
-**order/get the new retaining bolt for the chuck (M12 - 320-330 mm)
 **make supports for the new tools on the french cleats
-**connect the lights/ or replace it with some LED strips on the dust collection<br />
+**Install some more lights?<br />
 *Planer/jointer
-**<s>Replace and</s> <s>adjust the blades</s> + fix the broken bolt (we have new bolts, to be replace next time we change the blades)
+**new motor.
-**Build a side fence
-**<s>Build/buy a dust collector</s>
-**built a platform above the planer storage corner to protect it from tools, etc.
-<br />
-*Miter saw station + storage
-**<s>Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage</s>
-<br />
-*Dust collection system
-**<s>Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit</s>
-***<s>1m flexible hose to connect to the miter dust collection box</s>
-**Flexible hose to connect to band saw or lathe (1.5-2m)
-**Dust collection pipe behind the drill press with double door for drill press and belt sander <br />