166
redigeringar
Trärummet: Skillnad mellan sidversioner
ingen redigeringssammanfattning
Cloraux (diskussion | bidrag) Ingen redigeringssammanfattning |
Cloraux (diskussion | bidrag) Ingen redigeringssammanfattning |
||
| Rad 9: | Rad 9: | ||
**<s>Adjust the table top (currently not perfectly flat)</s> | **<s>Adjust the table top (currently not perfectly flat)</s> | ||
**<s>tighten the screws of the fence, check for squareness and adjust the distance mark</s> | **<s>tighten the screws of the fence, check for squareness and adjust the distance mark</s> | ||
**<s>General cleaning</s> | **<s>General cleaning</s><br /> | ||
<br /> | |||
*Table router | *Table router | ||
**Cut and install new top board made of phenolic coated plywood | **Cut and install new top board made of phenolic coated plywood | ||
**Add height adjustment screws to the router board | **Add height adjustment screws to the router board | ||
**Finish the router fence | **<s>Finish the router fence</s> | ||
**Fix the spindle locking pin | **Fix the spindle locking pin | ||
**Check the height adjustment mechanism. Bits move down slightly when used. | **<s>Check the height adjustment mechanism. Bits move down slightly when used.</s><br /> | ||
<br /> | |||
*Band saw | *Band saw | ||
**Order and install new tires on the wheels | **Order and install new tires on the wheels - on their way | ||
**Install brushes to clean the wheels | **Install brushes to clean the wheels | ||
**Balancing of the wheels to reduce vibrations | **Balancing of the wheels to reduce vibrations | ||
**Replace the small dust collector hole for a large one to connect to the HF vacuum. | **<s>Replace the small dust collector hole for a large one to connect to the HF vacuum.</s> | ||
**Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>) | **Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)<br /> | ||
<br /> | |||
*Drill press | *Drill press | ||
**Fix it with a chain to the ceiling/bold it to the ground | **Fix it with a chain to the ceiling/bold it to the ground | ||
**Add a bolt to the top gear cover | **Add a bolt to the top gear cover | ||
**3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>) | **3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>) (or by one in bauhaus)<br /> | ||
<br /> | |||
*Lathe | *Lathe | ||
**order/get the new retaining bolt for the chuck | **Clean and grease the speed vario - 6260 bearings on their way for reassembly | ||
**order/get the new retaining bolt for the chuck (M12 - 320-330 mm) | |||
**make supports for the new tools on the french cleats | **make supports for the new tools on the french cleats | ||
**connect the lights/ or replace it with some LED strips on the dust collection | **connect the lights/ or replace it with some LED strips on the dust collection<br /> | ||
<br /> | |||
*Planer/jointer | *Planer/jointer | ||
**<s>Replace and</s> adjust the blades + fix the broken bolt | **<s>Replace and</s> <s>adjust the blades</s> + fix the broken bolt (we have new bolts, to be replace next time we change the blades) | ||
**Build a side fence | **Build a side fence | ||
**Build/buy a dust collector | **<s>Build/buy a dust collector</s> | ||
**built a platform above the planer storage corner to protect it from tools, etc. | **built a platform above the planer storage corner to protect it from tools, etc. | ||
| Rad 54: | Rad 45: | ||
*Miter saw station + storage | *Miter saw station + storage | ||
**Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage | **<s>Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage</s> | ||
<br /> | <br /> | ||
*Dust collection system | *Dust collection system | ||
**Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit | **<s>Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit</s> | ||
***1m flexible hose to connect to the miter dust collection box | ***<s>1m flexible hose to connect to the miter dust collection box</s> | ||
**Flexible hose to connect to band saw or lathe (1.5-2m) | **Flexible hose to connect to band saw or lathe (1.5-2m) | ||
**Dust collection pipe behind the drill press with double door for drill press and belt sander | **Dust collection pipe behind the drill press with double door for drill press and belt sander <br /> | ||