166
redigeringar
Träsvarv, Solberga SVT 600: Skillnad mellan sidversioner
Träsvarv, Solberga SVT 600 (visa wikitext)
Versionen från 25 februari 2020 kl. 22.43
, 25 februari 2020→Gallery
Cloraux (diskussion | bidrag) (Skapade sidan med '{| style="clear: right; float: right; width: 20em; padding: 0.3em; margin: 0.5em 0 0.5em 1em; border: 1px solid #A3B1BF; background: #f5faff; text-align: left; font-size: 100%...') |
Cloraux (diskussion | bidrag) |
||
| Rad 82: | Rad 82: | ||
**Visual check whether unit or parts are damaged | **Visual check whether unit or parts are damaged | ||
**Check whether power cable is damaged | **Check whether power cable is damaged | ||
**Vacuum and clean the | **Vacuum and clean the lathe | ||
* | *Weekly | ||
** | **Run the lathe and operate it over the full speed range. Dust can over time built up and reduce the range of speed. If it happens, disassemble the speed mechanism and clean it with wire brush and add new grease. | ||
**Clean the | *Annually | ||
**Clean and add new grease to the spindle bearings. Clean and grease the speed mechanism. | |||
* TODO | |||
** Connect the lights on the lathe garde | |||
** Rebuild the speed mechanism and install the A48 v-belt instead of the A49 currently in. | |||
** Decide whether we need the engine two speed switch or only the on/off switch. | |||
** Built some supports on the wall for the tools | |||
===Reservdelar=== | ===Reservdelar=== | ||
We | We have a set of spare V-belts for the lathe. | ||
Upper V-belt: A48 | |||
Lower V-belt: A42 | |||
Speed lever mechanism needs two 6202 sealed bearings (15*35*11mm) | |||
# | # | ||
| Rad 95: | Rad 107: | ||
==Logg== | ==Logg== | ||
*2020-02- | *2020-02-25: almost running. speed lever under renovation | ||
*2019- | *2019-XX-XX: Inköpt | ||
* | * | ||
==Länkar== | ==Länkar== | ||
==Ägare== | ==Ägare== | ||
Maskinen inköpt av Makerspace 2019- | Maskinen inköpt av Makerspace 2019-XX-XX | ||
==Gallery== | ==Gallery== | ||