166
redigeringar
Träsvarv, Solberga SVT 600: Skillnad mellan sidversioner
Träsvarv, Solberga SVT 600 (visa wikitext)
Versionen från 25 februari 2020 kl. 23.08
, 25 februari 2020ingen redigeringssammanfattning
Cloraux (diskussion | bidrag) Ingen redigeringssammanfattning |
Cloraux (diskussion | bidrag) Ingen redigeringssammanfattning |
||
| Rad 11: | Rad 11: | ||
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Kostnad att använda:''' Gratis | | style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Kostnad att använda:''' Gratis | ||
|- | |- | ||
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Arbetsyta:''' | | style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Arbetsyta:''' | ||
|- | |- | ||
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Obelastad hastighet:''' 390-2600 RPM | | style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Obelastad hastighet:''' 390-2600 RPM | ||
| Rad 21: | Rad 21: | ||
==Generell information== | ==Generell information== | ||
<br /> | This lathe has an electric motor with two speeds. A lever allow to adjust the speed from 390 to 2600 RPM. On the front panel, there is an emergency switch. The current switch on the front panel is an ON/OFF switch and the motor speed can't be changed. | ||
There is an emergency switch in the front panel. <br /> | |||
==Säkerhetsinformation== | ==Säkerhetsinformation== | ||
* Before starting the machine, be sure that spindle work has the cup center properly embedded, tail stock and tool rest are securely clamped and there is proper clearance for the rotating stock | *Before starting the machine, be sure that spindle work has the cup center properly embedded, tail stock and tool rest are securely clamped and there is proper clearance for the rotating stock | ||
* Before starting the machine for faceplate work, disengage the spindle lock and check to see that the faceplate is tight against the spindle shoulder and the tool support has proper clearance | *Before starting the machine for faceplate work, disengage the spindle lock and check to see that the faceplate is tight against the spindle shoulder and the tool support has proper clearance | ||
* '''Wear safety glasses and a face shield, especially when roughing out work.''' | *'''Wear safety glasses and a face shield, especially when roughing out work.''' | ||
* Select turning speed carefully. Large diameters must be turned at the lowest speed. Always use the lowest speed to rough out work. | *Select turning speed carefully. Large diameters must be turned at the lowest speed. Always use the lowest speed to rough out work. | ||
* Wood with knots and splits should not be turned. Glued up stock should cure at least 24 hours. | *Wood with knots and splits should not be turned. Glued up stock should cure at least 24 hours. | ||
* Keep the tool rest close to the work. | *Keep the tool rest close to the work. | ||
* Remove the tool rest for sanding and polishing operations. Use a scraping cut for all face plate work | *Remove the tool rest for sanding and polishing operations. Use a scraping cut for all face plate work | ||
* Remove both the spur and cup centers when they are not in use | *Remove both the spur and cup centers when they are not in use | ||
* When you stop the lathe to check your work also check and lubricate the cup center | *When you stop the lathe to check your work also check and lubricate the cup center | ||
* Keep the lathe tools sharp; hold them firmly and in the proper position | *Keep the lathe tools sharp; hold them firmly and in the proper position | ||
* Keep your sleeves rolled up and other loose clothing away from the moving parts of the lathe and work | *Keep your sleeves rolled up and other loose clothing away from the moving parts of the lathe and work | ||
* Clean up debris and dust | *Clean up debris and dust | ||
==Handhavande av maskinen== | ==Handhavande av maskinen== | ||