406
redigeringar
Träsvarv, Solberga SVT 600: Skillnad mellan sidversioner
Träsvarv, Solberga SVT 600 (visa wikitext)
Versionen från 20 oktober 2025 kl. 09.13
, 20 oktober 2025ingen redigeringssammanfattning
Cloraux (diskussion | bidrag) Ingen redigeringssammanfattning |
Voxel (diskussion | bidrag) Ingen redigeringssammanfattning |
||
| (7 mellanliggande sidversioner av 5 användare visas inte) | |||
| Rad 21: | Rad 21: | ||
==Generell information== | ==Generell information== | ||
This lathe has an electric motor with two speeds. A lever allow to adjust the speed from 390 to 2600 RPM | This lathe has an electric motor with two speeds. A lever allow to adjust the speed from 390 to 2600 RPM with the combination of the two speeds switch. | ||
There is an emergency switch in the front panel. <br /> | There is an emergency switch in the front panel. <br /> | ||
| Rad 39: | Rad 39: | ||
*Keep your sleeves rolled up and other loose clothing away from the moving parts of the lathe and work | *Keep your sleeves rolled up and other loose clothing away from the moving parts of the lathe and work | ||
*Clean up debris and dust | *Clean up debris and dust | ||
==Inspiration== | |||
<youtube>rrMofxHgRw0</youtube> | |||
==Handhavande av maskinen== | ==Handhavande av maskinen== | ||
| Rad 49: | Rad 52: | ||
===Användarinstruktioner=== | ===Användarinstruktioner=== | ||
Se till att koppla in dammsugare innan du använder den! | Se till att koppla in dammsugare innan du använder den! | ||
To change the chuck: loosen the nut on the left side of the machine, do not unscrew the nut completely but create space between it and the machine. While holding the chuck, give the threaded rod/nut a light blow with a hammer. The chuck should now come loose and you can unscrew the nut on the left side of the machine and pull out the chuck with the thread rod. | |||
'''''Skriv något om hur man ställer de olika vinklarna''''' | '''''Skriv något om hur man ställer de olika vinklarna''''' | ||
| Rad 69: | Rad 74: | ||
**Clean and add new grease to the spindle bearings. Clean and grease the speed mechanism. | **Clean and add new grease to the spindle bearings. Clean and grease the speed mechanism. | ||
*TODO | *TODO | ||
**Built some supports on the wall for the tools | **Built some supports on the wall for the tools | ||
**Tailstock alignment | |||
===Reservdelar=== | ===Reservdelar=== | ||
| Rad 97: | Rad 100: | ||
==Gallery== | ==Gallery== | ||
[[Kategori:Trärummet]] | |||
[[Kategori:Trä]] | |||
[[Kategori:Kunskaps- och säkerhetskrav]] | |||