Bandsåg, EJCA BA45: Skillnad mellan sidversioner

ingen redigeringssammanfattning
Ingen redigeringssammanfattning
Rad 59: Rad 59:


==Förbrukningsmaterial==
==Förbrukningsmaterial==
In theory we should always have an extra set of blades in case the current blade is dull. We might be able to resharpen the blades, to be confirmed.  
The blades provided by the makerspace are for general purpose.  


The blades provided by the makerspace are for general purpose. 
Blade length: 3090 mm
 
4st 3086mm / 10mm / 6TPI - Currently 1st
 
2st 3086mm / 19mm / 4TPI - Currently 2st
 
2st 3086mm / 6mm / 14TPI - Currently 1st


Blade length: 3090 mm
 
To order new blades: <nowiki>http://www.bandsagblad.se/</nowiki>


==Underhåll och reservdelar==
==Underhåll och reservdelar==
Rad 71: Rad 78:
*Daily
*Daily
**Check for the blade alignment, and blade guide alignment (upper and lower guides).
**Check for the blade alignment, and blade guide alignment (upper and lower guides).
**Adjust the upper blade guide assembly heigt
**Adjust the upper blade guide assembly height
**Visual check whether unit or parts are damaged
**Visual check whether unit or parts are damaged
**Check whether power cable is damaged
**Check whether power cable is damaged
Rad 83: Rad 90:
**Grease the lower and upper wheel shafts. After letting the saw run for a few minutes, wipe out the excess of grease.
**Grease the lower and upper wheel shafts. After letting the saw run for a few minutes, wipe out the excess of grease.
*TODO
*TODO
**Replace the two SKF 6204 bearings of the upper wheel
**Balance the wheels
**Balance the wheels after installing the new bearings.
**Do the bottom blade guide


===Reservdelar===
===Reservdelar===
We do not have spare parts for this machine.  
We have the set of spare bearings for the top and the bottom wheels. If they ever need to be replaced.  


/// Add link for the new tires ///  
/// Add link for the new tires ///  
166

redigeringar