Trärummet

2020 to-do list for maintenance and upgrades

• Table saw
  • Blade height adjustment not working. Screw and gear are worn out.
  • Make zero-clearance inserts (create .dxf for the lasercutter)
  • Adjust the table top (currently not perfectly flat)
  • tighten the screws of the fence, check for squareness and adjust the distance mark
  • General cleaning
• Table router
  • Cut and install new top board made of phenolic coated plywood
  • Add height adjustment screws to the router board
  • Finish the router fence
• Band saw
  • Order and install new tires on the wheels
  • Balancing of the wheels to reduce vibrations
  • Replace the small dust collector hole for a large one to connect to the HF vacuum.
  • Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)
• Drill press
  • Fix it with a chain to the ceiling/bold it to the ground
  • Add a bolt to the top gear cover
  • 3D print dust collection segmented hose (see https://www.thingiverse.com/thing:3283800)
• Lathe
  • order/get the new retaining bolt for the chuck
  • make supports for the new tools on the french cleats
  • connect the lights/ or replace it with some LED strips on the dust collection