Ultimonster: Skillnad mellan sidversioner

Ultimonster (visa wikitext)

921 byte lades till , 26 november 2013

Print settings

22

redigeringar

@@ Rad 87: / Rad 87: @@
 ** 0.4mm nozzle size
+== Print settings ==
+It would be nice if we can keep track of print settings and results here.
+=== Andreas first prints 2013-11-26 ===
+Used Cura 13.11 (on my laptop) and printed two small (~4x4x2 & ~8x5x2 cm) gingerbread cutters. Very happy with my first print on this machine, except maybe retraction so a few strings had to be cut off afterwards.
+* Basic: Layer height=0.2, Shell thickness=0.8, Enable retraction=Y, Botton/Top fill=0.4, Fill density=30%, Print speed=50mm/s, Print temperature=210, Bed temperature=60, Support=None, Platform adhesion type=Brim, Filament diameter=2.85, Flow=100%
+* Advanced: Nozzle: 0.4, Retraction speed=40, Distance 4.5, Initial layer=0.3, Cut off object bottom=0, Dual extrusion overlap=0.2, Speed travel=150, Bottom layer speed=20, Infill speed=0, Minimal layer time=5, Enable cooling fan=Y
+* Start g-code: http://pastebin.com/SYAEtuP9
+* End g-code: http://pastebin.com/urSF5dci
 == Change Log ==