Hoppa till navigering Hoppa till sök


1 245 byte lades till, 17 december 2019 kl. 22.38
ingen redigeringssammanfattning
2020 to-do list for maintenance and upgrades
* Table saw
** Blade height adjustment not working. Screw and gear are worn out.
** Make zero-clearance inserts (create .dxf for the lasercutter)
** Adjust the table top (currently not perfectly flat)
** tighten the screws of the fence, check for squareness and adjust the distance mark
** General cleaning
* Table router
** Cut and install new top board made of phenolic coated plywood
** Add height adjustment screws to the router board
** Finish the router fence
* Band saw
** Order and install new tires on the wheels
** Balancing of the wheels to reduce vibrations
** Replace the small dust collector hole for a large one to connect to the HF vacuum.
** Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)
* Drill press
** Fix it with a chain to the ceiling/bold it to the ground
** Add a bolt to the top gear cover
** 3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>)
* Lathe
** order/get the new retaining bolt for the chuck
** make supports for the new tools on the french cleats
** connect the lights/ or replace it with some LED strips on the dust collection
<br />