Ultimonster: Skillnad mellan sidversioner

Print settings
(Added specifications)
(Print settings)
Rad 87: Rad 87:
** 0.4mm nozzle size
** 0.4mm nozzle size


== Print settings ==
It would be nice if we can keep track of print settings and results here.
=== Andreas first prints 2013-11-26 ===
Used Cura 13.11 (on my laptop) and printed two small (~4x4x2 & ~8x5x2 cm) gingerbread cutters. Very happy with my first print on this machine, except maybe retraction so a few strings had to be cut off afterwards.
* Basic: Layer height=0.2, Shell thickness=0.8, Enable retraction=Y, Botton/Top fill=0.4, Fill density=30%, Print speed=50mm/s, Print temperature=210, Bed temperature=60, Support=None, Platform adhesion type=Brim, Filament diameter=2.85, Flow=100%
* Advanced: Nozzle: 0.4, Retraction speed=40, Distance 4.5, Initial layer=0.3, Cut off object bottom=0, Dual extrusion overlap=0.2, Speed travel=150, Bottom layer speed=20, Infill speed=0, Minimal layer time=5, Enable cooling fan=Y
* Start g-code: http://pastebin.com/SYAEtuP9
* End g-code: http://pastebin.com/urSF5dci


== Change Log ==
== Change Log ==
22

redigeringar