Trärummet: Skillnad mellan sidversioner

* Table saw

** Blade height adjustment not working. Screw and gear are worn out.

** Make zero-clearance inserts (create .dxf for the lasercutter)

** Adjust the table top (currently not perfectly flat)

** tighten the screws of the fence, check for squareness and adjust the distance mark

** General cleaning

* Table router

** Cut and install new top board made of phenolic coated plywood

** Add height adjustment screws to the router board

** Finish the router fence

* Band saw

** Order and install new tires on the wheels

** Balancing of the wheels to reduce vibrations

** Replace the small dust collector hole for a large one to connect to the HF vacuum.

** Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)

* Drill press

** Fix it with a chain to the ceiling/bold it to the ground

** Add a bolt to the top gear cover

** 3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>)

* Lathe

** order/get the new retaining bolt for the chuck

** make supports for the new tools on the french cleats

** connect the lights/ or replace it with some LED strips on the dust collection