12
redigeringar
Trärummet: Skillnad mellan sidversioner
ingen redigeringssammanfattning
Cloraux (diskussion | bidrag) Ingen redigeringssammanfattning |
X (diskussion | bidrag) Ingen redigeringssammanfattning |
||
| Rad 5: | Rad 5: | ||
***<s>Order D-71 wormwheel D-56 height adjustment rod</s> | ***<s>Order D-71 wormwheel D-56 height adjustment rod</s> | ||
***<s>Install new parts, check for loose screws and friction in the machanism</s> | ***<s>Install new parts, check for loose screws and friction in the machanism</s> | ||
***<s>follow this forum for more info | ***<s>follow this forum for more info https://www.woodworkforums.com/f153/bought-mj2325b-2nd-hand-help-76708/2</s> | ||
**Make zero-clearance inserts (create .dxf for the lasercutter) | **Make zero-clearance inserts (create .dxf for the lasercutter) | ||
**<s>Adjust the table top (currently not perfectly flat)</s> | **<s>Adjust the table top (currently not perfectly flat)</s> | ||
| Rad 23: | Rad 23: | ||
**Balancing of the wheels to reduce vibrations | **Balancing of the wheels to reduce vibrations | ||
**<s>Replace the small dust collector hole for a large one to connect to the HF vacuum.</s> | **<s>Replace the small dust collector hole for a large one to connect to the HF vacuum.</s> | ||
**Make a small dust collection system under the table (e.g. | **Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)<br /> | ||
*Drill press | *Drill press | ||
**Fix it with a chain to the ceiling/bold it to the ground | **Fix it with a chain to the ceiling/bold it to the ground | ||
**Add a bolt to the top gear cover | **Add a bolt to the top gear cover | ||
**3D print | **3D print [https://www.thingiverse.com/thing:3283800 dust collection segmented hose] (or buy one in bauhaus)<br /> | ||
*Lathe | *Lathe | ||