|
|
| Rad 2: |
Rad 2: |
|
| |
|
| *Table saw | | *Table saw |
| **<s>Blade height adjustment not working. Screw and gear are worn out.</s>
| |
| ***<s>Order D-71 wormwheel D-56 height adjustment rod</s>
| |
| ***<s>Install new parts, check for loose screws and friction in the machanism</s>
| |
| ***<s>follow this forum for more info https://www.woodworkforums.com/f153/bought-mj2325b-2nd-hand-help-76708/2</s>
| |
| **Make zero-clearance inserts (create .dxf for the lasercutter) | | **Make zero-clearance inserts (create .dxf for the lasercutter) |
| **<s>Adjust the table top (currently not perfectly flat)</s>
| |
| **<s>tighten the screws of the fence, check for squareness and adjust the distance mark</s>
| |
| **<s>General cleaning</s><br />
| |
|
| |
|
| *Table router
| | <br /> |
| **Cut and install new top board made of phenolic coated plywood
| |
| **Add height adjustment screws to the router board
| |
| **<s>Finish the router fence</s>
| |
| **Fix the spindle locking pin
| |
| **<s>Check the height adjustment mechanism. Bits move down slightly when used.</s><br />
| |
|
| |
|
| *Band saw | | *Band saw |
| **Order and install new tires on the wheels - on their way
| |
| **Install brushes to clean the wheels
| |
| **Balancing of the wheels to reduce vibrations | | **Balancing of the wheels to reduce vibrations |
| **<s>Replace the small dust collector hole for a large one to connect to the HF vacuum.</s>
| |
| **Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)<br /> | | **Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)<br /> |
|
| |
|
| Rad 31: |
Rad 16: |
|
| |
|
| *Lathe | | *Lathe |
| **Clean and grease the speed vario - 6260 bearings on their way for reassembly
| |
| **order/get the new retaining bolt for the chuck (M12 - 320-330 mm)
| |
| **make supports for the new tools on the french cleats | | **make supports for the new tools on the french cleats |
| **connect the lights/ or replace it with some LED strips on the dust collection<br /> | | **Install some more lights?<br /> |
|
| |
|
| *Planer/jointer | | *Planer/jointer |
| **<s>Replace and</s> <s>adjust the blades</s> + fix the broken bolt (we have new bolts, to be replace next time we change the blades) | | **new motor. |
| **Build a side fence
| |
| **<s>Build/buy a dust collector</s>
| |
| **built a platform above the planer storage corner to protect it from tools, etc.
| |
| | |
| <br />
| |
| | |
| *Miter saw station + storage
| |
| **<s>Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage</s>
| |
| | |
| <br />
| |
| | |
| *Dust collection system
| |
| **<s>Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit</s>
| |
| ***<s>1m flexible hose to connect to the miter dust collection box</s>
| |
| **Flexible hose to connect to band saw or lathe (1.5-2m)
| |
| **Dust collection pipe behind the drill press with double door for drill press and belt sander <br />
| |
