Stockholm Makerspace Wiki

Carvera Air: Skillnad mellan sidversioner

Sida Diskussion

Carvera Air (visa wikitext)

Versionen från 15 mars 2025 kl. 10.40

16 788 togs bort ,  15 mars
ingen redigeringssammanfattning
VisuellWikitext
mIngen redigeringssammanfattning
Ingen redigeringssammanfattning
 
(7 mellanliggande sidversioner av samma användare visas inte)
Rad 20: Rad 20:
= How to use =
= How to use =


The following steps assumes you have prepared your Gcode from your favorite CAM software.


https://wiki.makera.com/en/Air/How-Tos
As an alternative, you can also use Makera CAM software. The steps are described here <<TODO>>
 
== Prepare your GCode ==
'''- Please refer this page for adding Carvera profile and post processor in Fusion 360, VCarve Desktop'''
 
https://github.com/MakeraInc/CarveraProfiles
 
== Install Controller software ==
The Controller software for Carvera Air will most likely be installed on a common computer or a tablet that is attached to the device. Until then or If you prefer to have it installed on your own computer, you can do so from https://github.com/MakeraInc/CarveraController
 
== Upload your GCode to Carvera Air ==
- Launch Carvera Controller software<gallery>
Fil:Controller.png
</gallery>
 
 
- If you are running for first time, you will need to search the machine name in WiFi. When you search, you will find it with the name '''''Makerspace_CarveraAir'''''




= How to Upload a File =
In this video, we are guided through uploading a GCode file to Carvera Air Desktop CNC by Makera! After designing a part and preparing it in CAM software, you will need to upload the exported GCode file to the Carvera Air to begin manufacturing. This is done through the Carvera Controller app, as all files are stored on the Carvera Air's internal memory as shown in this tutorial.
In this video, we are guided through uploading a GCode file to Carvera Air Desktop CNC by Makera! After designing a part and preparing it in CAM software, you will need to upload the exported GCode file to the Carvera Air to begin manufacturing. This is done through the Carvera Controller app, as all files are stored on the Carvera Air's internal memory as shown in this tutorial.


<youtube>ysmz5AFIHmM </youtube>
<youtube>ysmz5AFIHmM </youtube>


== Attaching Z-Probe ==
<< TODO >>
== Changing bit / endmill ==
<< TODO >>
== Holding your Stock ==
<< TODO >>
== Cleaning ==
<< TODO >>
https://wiki.makera.com/en/Air/How-Tos
= Choosing Bits =
In this video, we look at the different types of bits, also known as cutting tools, that you might consider for your CNC Project. Bits are what perform the cutting operations when manufacturing our projects, and choosing the correct bit to perform the type of cut we want on the material we are using is key. This video overviews the commonly used milling bits that are provided with the Carvera and Carvera Air, as well as some specialty bits for more complex projects too!
<youtube>hccjn5_Wnwc</youtube>
= Choosing Stock =
Stock is the term used to describe the material we used to manufacture our CNC projects. Versatile desktop CNC machines like the Carvera and Carvera Air can work with a wide range of materials, including woods, acrylic, composites, metals, and even printed circuit boards! As you choose the right stock for your project, there are some key considerations like choosing the right bits and speeds and feeds as well as needs for external cooling that will contribute towards the success of your project. This video also discusses the good practice for performing test cuts as we start a new project
<youtube>WUZIIvb-mHE</youtube>
= How to change the tool =
In this video, we are guided through using the Quick Tool Change System on the Carvera Air Desktop CNC by Makera! The Air is equipped with a unique tool change system which allows for users to connect an easily swap the bit (also known as a cutting tool) on their CNC
<youtube> IaVHlaHvsBk </youtube>


= Manual - How to change Spindle Collet =




= Manual - How to change Spindle Collet =
In this video, we are guided through changing the Spindle Collect on the Carvera Air Desktop CNC by Makera! Spindle Collet is the part of a CNC Spindle which that holds the bit. By changing the collet, you can change the diameter bit used for your CNC projects with the Carvera Air!


<youtube>ZFmA60eqgx0</youtube>
<youtube>ZFmA60eqgx0</youtube>
Rad 38: Rad 92:
= Speeds & Feeds =
= Speeds & Feeds =


[[CarveraAir-Feeds&Speeds|Refer this page]]


Taken from https://wiki.makera.com/en/speeds-and-feeds
{| class="wikitable"
!Group
!Tools
!Aluminum
!Brass
!Carbon Fiber
!Copper
!Hardwood
!PCB
!Plastic
!Softwood
|-
! rowspan="5" |Single Flute Metal
!1*3mm Flat End(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:300
PFeed:100
DOC:0.05
| -
|RPM:12000
Feed:300
PFeed:100
DOC:0.05
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1.5*6mm Flat End(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:300
PFeed:100
DOC:0.05
| -
|RPM:12000
Feed:300
PFeed:100
DOC:0.05
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2*8mm Flat End(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.15
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
| -
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2.5*12mm Flat End(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
| -
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:2
|-
!3.175*12mm Flat End(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
| -
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:2
|-
! rowspan="8" |Single Flute Non Metal
!1*3mm Flat End
| -
| -
| -
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1.5*8mm Flat End
| -
| -
| -
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2*12mm Flat End
| -
| -
| -
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:0.5
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2.5*15mm Flat End
| -
| -
| -
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:2
|-
!3.175*17mm Flat End
| -
| -
| -
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:2
|-
!3.175*25mm Flat End
| -
| -
| -
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:2
|-
!3.175*32mm Flat End
| -
| -
| -
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:2
|-
!3.175*42mm Flat End
| -
| -
| -
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
| -
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:2
|-
! rowspan="5" |Engraving Metal
!0.1mm*60° Engraving(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
| -
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:1000
PFeed:500
DOC:2
|-
!0.2mm*30° Engraving(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
| -
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:1000
PFeed:500
DOC:2
|-
!0.3mm*30° Engraving(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
| -
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:1000
PFeed:500
DOC:2
|-
!0.4mm*30° Engraving(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
| -
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:1000
PFeed:500
DOC:2
|-
!0.5mm*30° Engraving(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
| -
|RPM:12000
Feed:300
PFeed:100
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:1000
PFeed:500
DOC:2
|-
! rowspan="5" |Engraving Non Metal
!0.1mm*30° Engraving
| -
| -
| -
| -
|RPM:12000
Feed:1000
PFeed:500
DOC:1
| -
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:1000
PFeed:500
DOC:2
|-
!0.2mm*30° Engraving
| -
| -
| -
| -
|RPM:12000
Feed:1000
PFeed:500
DOC:1
| -
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:1000
PFeed:500
DOC:2
|-
!0.3mm*30° Engraving
| -
| -
| -
| -
|RPM:12000
Feed:1000
PFeed:500
DOC:1
| -
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:1000
PFeed:500
DOC:2
|-
!0.4mm*30° Engraving
| -
| -
| -
| -
|RPM:12000
Feed:1000
PFeed:500
DOC:1
| -
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:1000
PFeed:500
DOC:2
|-
!0.5mm*30° Engraving
| -
| -
| -
| -
|RPM:12000
Feed:1000
PFeed:500
DOC:1
| -
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:1000
PFeed:500
DOC:2
|-
! rowspan="5" |Ball Nose Metal
!1*3mm ball nose(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:500
PFeed:200
DOC:1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:2
|-
!1.5*4.5mm ball nose(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:500
PFeed:200
DOC:1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:2
|-
!2*6mm ball nose(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:500
PFeed:200
DOC:1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:2
|-
!2.5*7.5mm ball nose(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:500
PFeed:200
DOC:1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:2
|-
!3.175*10mm ball nose(Metal)
|RPM:12000
Feed:500
PFeed:200
DOC:0.2
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:500
PFeed:200
DOC:1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:2
|-
! rowspan="5" |Ball Nose Non Metal
!1*4mm ball nose
| -
| -
| -
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:2
|-
!1.5*8mm ball nose
| -
| -
| -
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:2
|-
!2*12mm ball nose
| -
| -
| -
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:2
|-
!2.5*15mm ball nose
| -
| -
| -
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:2
|-
!3.175*22mm ball nose
| -
| -
| -
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
| -
|RPM:12000
Feed:500
PFeed:200
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:2
|-
! rowspan="20" |Corn Bits
!0.6mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!0.7mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!0.8mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!0.9mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!1.1mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!1.2mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!1.3mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!1.4mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!1.5mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!1.6mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!1.7mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!1.8mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!1.9mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!1mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!2.1mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!2.4mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!2.5mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!2mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!3.175mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
!3mm Corn
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|RPM:12000
Feed:500
PFeed:300
DOC:0.3
| -
| -
|-
! rowspan="30" |Drill
!0.2*3.5mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:0.5
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!0.3*5.5mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:0.5
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!0.4*7mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:0.5
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!0.5*8.5mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:0.5
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!0.6*9.5mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!0.7*10mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!0.8*10mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!0.9*10mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1*10mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1.1*10mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1.2*10mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1.3*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1.4*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1.5*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1.6*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1.7*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1.8*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!1.9*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2.1*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2.2*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2.3*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2.4*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2.5*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2.6*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2.7*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2.8*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!2.9*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!3*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!3.175*12mm Drill
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:100
DOC:0.2
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:200
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|RPM:10000
Feed:1000
PFeed:300
DOC:1
|-
!Chamfering Bits
!0.1mm*90° Chamfering
|RPM:12000
Feed:600
PFeed:200
DOC:0.2
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:500
PFeed:200
DOC:0.1
|RPM:12000
Feed:1000
PFeed:500
DOC:1
|RPM:12000
Feed:1200
PFeed:500
DOC:2
|-
!Solder Mask Remover
!0.3mm*30° Solder Mask Removal
| -
| -
| -
| -
| -
|RPM:6000
Feed:400
PFeed:200
DOC:0.2
| -
| -
|}


== Ägandeförhållande ==
== Ägandeförhållande ==
Denna maskin ägs av Stockholm Makerspace.
Denna maskin ägs av Stockholm Makerspace.
Prakash
15

redigeringar

Hämtad från "https://wiki.makerspace.se/Special:Mobil_diff/9246...9275"