Scroll saw — Cocraft HS85-D
Small scroll saw for fine curves and detailed cut-outs.
Cocraft HS85-D scroll saw
Manufacturer photo.
Location | Wood room, bench next to the mitre saw |
Access | Wood room course. No booking, free. |
Blades | 133 mm, pin-end |
Max thickness | 50 mm wood |
Help / faults | Slack #trärummet-woodroom |
Materials
Yes: clean wood.
Plastics: check the plastic, blade and extraction first.
No: metal or stone.
Thinner stock gives better results.
Safety
Eye and hearing protection, dust mask.
Saw bolted to a stable bench, guard fitted.
Hold the work flat on the table; keep hands clear of the blade and out from under the table.
Let the blade cut — don't force or twist it.
Unplug before setup, blade changes or freeing a stuck cut.
Blades
133 mm pin-end blades. Pinless blades need matching holders.
130 mm blades have not been tested — don't use them.
Blade change and tensioning: see manual (English pp. 3–10).
Where to buy (check length, ends and tooth count): Clas Ohlson · Biltema · Bauhaus
Maintenance
Unplug before cleaning. Remove dust and chips; keep table and guard in good condition.
Report faults in blade holders, switch or mounting.
Specifications
Model | Cocraft HS85-D (Clas Ohlson art. 30-9686 / 18-3058) |
Blade | 133 mm |
Max wood thickness | 50 mm |
Throat | 410 mm |
Table tilt | 0–45° |
Documents and links
Cocraft HS85-D manual (PDF, 44 pages) — English pp. 3–10, Swedish pp. 11–18.